Learning Outcomes

Steam Theory

Steam Engine Thermodynamic Cycles

Main Boilers

High Pressure Water Tube Boiler

Lesson Summary

In this module, you will be introduced to the steam theory, as well as the heat transfer and properties of the fluid. You will also be introduced to the steam engine thermodynamic cycle, as well the main boilers features and the principles of boiler design.

Drum Type WT  Double Evaporation Boiler

Foster Wheeler ESD Boilers

Once Through Boilers and Boiler Mountings

Automatic Feed Regulation and High Pressure Systems

In this module, you will be introduced to the double evaporation boiler, as well as the foster wheeler ESD boilers. You will also be introduced to the V2M-8 main Boiler combustion engineering, as well as the once-through boiler types and the main steam stop valve.

Diploma in Marine Boilers - First Assessment

Safety Valve and Relief Valve

Improved High Lift

Maintenance of Safety Valve

Reflex Level Gauge

Boiler Refractories

In this module, you will be introduced to the safety valve and relief valve definitions and terms. You will also be introduced to a low lift safety valve, improved high lift, high capacity (full lift) safety valve, as well as the maintenance of the safety valve.

Operation of Soot Blowers

High Pressure Boiler Design and Challenges

Waste Recovery System

Exhaust Gas Economizer

Boiler Combustion Process

In this module, you will be introduced to the concept of soot blowers for high boilers, as well as the diamond retractable soot blower. You will also be introduced to the main fuel system, as well as the process of liquid fuel burning in an open furnace.

Diploma in Marine Boilers - Second Assessment

Diploma in Marine Boilers - Course Assessment

Study this free online course on the components of marine boilers and the processes involved in boiler heat transfer.

Diploma in Marine Boilers

Marine boilers are critical ship elements and are responsible for many ship functions. This Diploma in Marine Boilers free online course teaches you how a marine boiler can be used for main and auxiliary purposes like steam production for running a steam turbine and steam propulsion. You will also learn about cargo pump-turbines, oil heating, accommodation heating and all about the design and maintenance of marine boilers.

This Diploma in Marine Boilers is a free online course that begins by introducing you to the application of high-pressure boilers to run the main propulsion turbines of ships. Although this system is on the decline because of newer combined-cycle plants that harness the flexibility of diesel and steam plants, the use of auxiliary and exhaust gas boilers remain an established practice on board diesel-powered propulsion plants. The course will introduce you to steam theory, the components and properties of fluids, the combination of the important modes of heat transfer, as well as the technical terms that are used in connection with steam generation. It will outline the steam engine thermodynamic cycles, the advantages of the steam plant and the role of steam in power generation. The principle of steam generation, the features of boiler design, classification of boiler types and the popular boilermakers will also be covered in this course.
The material then explains how a marine boiler is optimized for producing steam, as well as how it can be used for main and auxiliary functions like running steam and cargo pump-turbines, oil heating, crew accommodation heating and turbo generation. You will study fire and water tubes, composite boiler types such as the low-pressure boiler as well as how all boilers have a furnace or combustion chamber where fuel is burnt to release energy. The course will teach you the process where the air is supplied to the boiler furnace to enable the combustion of fuel to take place, as well as how the water fed into the boiler can be used to produce steam. It highlights the other important aspect of heat recovery from the diesel engine exhausts, which is the exhaust gas boiler or economizer, as well as how these can be both fire or water tube types and how they contribute significantly to overall plant efficiency. As you work through this marine boilers course, you will analyze the differences between the subcritical and supercritical power plants, types of once-through boilers and the characteristics of D-type boilers. The function of various components in a boiler and boiler mountings, along with mastering the characteristics of the main steam stop and feed check valves is then discussed. Learn all about the feed regulatory system that can be used in steam boilers of a low-pressure system, as well as how to monitor the movement of the float. The examples of a float control application, the element of water level control in high-pressure systems, as well as the importance of the safety and relief valves, will be demonstrated. 
This course on the mechanics of marine boilers will help improve your knowledge of the vital maintenance of the safety valves, including the procedure to set a safety valve of improved high-lift type, as well as the operation of the soot blowers and you should enrol if you are a marine engineering student, professional boilermaker or interested in this crucial part of shipping mechanics.

Open edX Conference 2024: Program & Speakers

Coursera Announces Layoffs, Stock Plunges Despite $100M Milestone

Coursera and Udemy are Finally One. What’s Next?

White-Labeling in Online Education: Whose Credential Is It Anyway?

Coursera’s $100 Million Thesis: Andrew Ng Will Think of Something

8 Best Ecology Courses for 2025: How Species and Systems Interact

40+ Free Certificates from Wolfram U: Expand Your Computational Universe

FutureLearn’s 2021: Year in Review

Udemy is “Intentionally Reducing” the Business That Made It Famous. It’s Not Working.

9 Best Quilting Courses for 2026: Turn Fabric Scraps Into Heirlooms

Coursera Q1 2022: $120.4M Revenue, $38.3M in Losses, 16K Degree Students

10 Best Free Rust Courses for 2025: Write Memory-Safe Code

Chinese Edtech Pivots: Well-rounded Education, Hardware, Agriculture E-commerce, Fast-Food, Garments, and More

How to Start a Business in Dubai With No Money?

11 Best ChatGPT & Prompt Engineering Courses for 2025

Best Side Hustles in Dubai to Earn Extra Money in the UAE

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

Advanced Hazardous Materials Handling Techniques - Lesson Summary

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Hazardous Materials Handling Mastery - Course Assessment

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.